Enpress Green Filtration Series High Capacity Cartridge - Pleated 20xNanoAl w/PAC Powder Carbon Core (CT-20NANO-PAC AG) For 1 and 1.25" Cartridge Tank
- Ideal for Residential, Food Service, Commercial and Industrial applications.
- Effective at reducing unwanted bad taste and odor, along with chlorine taste and odor from potable drinking water.
- Ideal as polishing or pre-filters in applications requiring fine filtration and high capacity.
- High Porosity / Exceptionally low pressure drop.
- High dirt holding capacity.
- Excellent contaminant reduction.
- 1.25" NanoAl with Pleated Cartridge 20 to ≈.2 Micron w/PAC/Carbon Block Core.
- Service flow ≈7 GPM. Peak flow ≈45+ GPM. Capacity >150,000 Gallons.
Cartridge Replacements
Press the red pressure relief valve
Pull snap-ring
Lift to cap
Install the cartridge
Put the cap back on
Install the snap-ring
Put on the protective cap
No Tools
The Green Filtration Series are electropositively charged dual gradient double pleated filtration solutions that successfully remove contaminants from 1 to 0.2 microns, featuring ENPRESS NanoAl™ media. The filters are designed with a larger 20 micron pre-filtration layer externally and the charged media internally, extending filtration level contamination and service life, while achieving high flow and low pressure drop. The filters will outperform competitive filtration solutions in all turbidity applications including insoluble scale, Fe3, bacterial iron slime, colloidal solids, silt, rust, and other particle filtration, resulting in higher water quality and longer life of the filtration system.
The Green Series of pleated filters features a thermally bonded blend of micro-glass fibers & cellulose, infused with nanoalumina fibers in a non-woven matrix that creates an electropositively charged depth filter media. When assembled into a pleated cartridge, our solution offers a unique combination of efficiency, capacity, flow rate, & low pressure drop that allow this nonwoven media to filter like a NF polymeric membrane, at levels unmatched in today’s filtration marketplace. All filters feature the use of Agion® antimicrobial technology that provides built-in protection by working 24/7 resisting the growth of microbes.
Better
Filtration
There`s No
Competition
Known foulants for RO membranes that are reduced by this adsorptive technology: Virus, bacteria, colloids (Iron, Manganese, Silica, etc), Cellular debris is also reduced: Lipids (hydrophobic and hydrophylic), Phospholipid, Proteins, Car bohydrates, and Glucose - mono and poly saccharides (TEP/EPS)
Data suggests adsorptive filter media could represent a significant improvement to membrane performance, life and overall operating cost by reducing fouling.
Additional filtration highlights include: Removal of Humic Acid based tannins; 3-4 log reduction, cyst removal; Endotoxin removal; Selected Heavy Metal Removal: Fe2, Fe3, Sn, Cu, Cr3, Al; Reduces Membrane fouling; Pre-, Post-, and Stand-Alone Filtration Solution
Green
Series
Configuration
Top Cap option with pressure release Valve & Removal Handles
2.5” Thread top/bottom Res./LC Cap threaded connection
Snap Ring I.D. Tag connection.
2.5” Bottom Drain Plumbing for Res./LC Filters.